±×¸²¿¡ ¸¶¿ì½º¸¦ ¿Ã¸®½Ã¸é ÇØ´ç Á¦Ç°¿¡ ´ëÇÑ »ó¼¼ÇÑ Á¤º¸¸¦ º¸½Ç ¼ö ÀÖ½À´Ï´Ù. |
FLOW Measurement ( Meter Run ) |
Product Catalog |
LEVEL TRANSMITTER |
|||||
¸ðµ¨¸í |
ÀÔ·Â |
Ãâ·Â |
Àü¿ø |
ºñ °í |
|
706 |
Level |
4-20mA |
24Vdc, Loop Power |
SIL2 Compliant, Intrinsic Safety |
|
GENESYS |
Level |
4 x 4-20mA |
24Vdc, Loop Power |
Various Multiple Layers Interface level measurement |
|
R80 |
Level |
4-20mA |
24Vdc, Loop Power |
SIL2 Suitable, Intrinsic Safety |
|
R86 |
Level |
4-20mA |
24Vdc, Loop Power |
SIL2 Suitable, Intrinsic Safety |
|
AURORA |
Level |
Magnetic Level Indication |
Local Level Indication |
ANSI / EN 1092 process connection available |
|
E3 Modulevel |
Level |
4-20mA |
24Vdc, Loop Power |
SIL2 Compliant, Intrinsic Safety |
|
Universal IV |
Level |
4-20mA |
24Vdc, Loop Power |
Intrinsic Safety |
|
IMPULSE Series |
Level |
4-20mA |
24Vdc, Loop Power |
Intrinsic Safety |
|
Water Cut Monitor |
Water |
4-20mA |
24Vdc, Loop Power |
Intrinsic Safety |
|
Level |
4-20mA |
24Vdc, Loop Power |
0.01% (<1mm) accuracy |
||
Magneto- |
Level |
4-20mA |
24Vdc, Loop Power |
SIL2 Compliant, Intrinsic Safety |
|
Pulse Bust Radar |
Level |
4-20mA |
24Vdc, Loop Power |
SIL1 Compliant, Intrinsic Safety |
LEVEL GAUGE |
|||||
¸ðµ¨¸í |
ÀÔ·Â |
Ãâ·Â |
Àü¿ø |
ºñ °í |
|
MLI |
Level |
Flag or Shuttle type Level Indication |
24Vdc, Loop Power |
ANSI / EN 1092 process connection available |
¸ðµ¨¸í |
ÀÔ·Â |
Ãâ·Â |
Àü¿ø |
ºñ °í |
|
The Point Level |
Level |
8mA, 16mA |
13-30Vdc |
Intrinsic Safety |
|
Level |
8mA, 16mA |
13-30Vdc |
Intrinsic Safety, SIL2/3 |
||
Clear Line Level |
Low Level |
DPDT Relay |
120Vac |
AMETEK Declaration of Conformity only |
|
MultiPoint Level |
Level |
3 x DPDT Relay |
95-145Vac |
|
|
T2x Level |
Level |
Contact |
N/A |
Intrinsic Safety |
|
Displacer Level |
Level |
Contact |
N/A |
Intrinsic Safety |
Copyright(c) TM Solutions inc. All rights reserved
Ƽ¿¥¼Ö·ç¼Ç(ÁÖ) / ¼¿ï½Ã ±Ýõ±¸ °¡»êµðÁöÅÐ2·Î 123, 717È£(¿ùµå¸Þ¸£µð¾Óº¥Ã³¼¾Å¸2 ºôµù717È£) / Tel:(02)784-2526 / Fax:(02)784-2547
´ëü°¡´É ¸ðµâ |
3510A, 3520A, 3530A, 3610A, 3620A, 3630A, 3640A, 3650A, 3660A, 3510DRA, 3520DRA, 3530DRA, 3610DRA, 3620DRA, 3640DRA, 3650DRA, 3660DRA, 3510T, 3530T, 3610T, 3630T, 3650T, 3654T, 3900F, 3909F, |
Àü¿ø |
100 ~ 240VAC, 50/60Hz ¶Ç´Â 24VDC±10%, Jumper Selectable |
DISPLAY |
4-digit, 7-Segment LED Dot Matrix Display Indication : PV, SP Value |
ÀÔ·Â Á¾·ù |
T/C : J,K,T,E,R,S,B,N,W RTD: 2,3 Wire Pt100(DIN & JIS),
Ni120, Cu10 |
Cold Junction : |
Cold Junction Compensation for T/C |
Ãâ·Â : |
Alarm Model : Dual 240VAC / 24VDC 5A
SPDT Relays, |
Front Panel ADJ. |
SP, Zero, Span, Alarm Latch Reset |
Á¤È®µµ : |
±0.1% of SPAN ¶Ç´Â ±10§ÅÁß Å«¼öÄ¡ |
ÀçÇö¼º : |
±0.1% of SPAN ¶Ç´Â ±10§ÅÁß Å«¼öÄ¡ |
Dead Band : |
0.5% ~ 50% SPAN |
Alarm Indication : |
Display Flash |
Time Delay : |
0.0 ~ 20.0 Sec, S/W Selectable |
Burn Out : |
S/W Selectable for T/C, RTD |
Reverse Output : |
S/W Selectable |
·çÇÁ Àü¿ø : |
24VDC isolated supply upto 21mA, Jumper Seletable |
¸Þ¸ð¸® : |
Flash Memory |
Isolation : |
1,000VDC input/output/power |
ÁÖº¯ ¿Âµµ : |
0 ~ 60µµ¾¾ |
ÁÖº¯¿Âµµ ¿µÇâ : |
±0.018% of SPAN ¶Ç´Â ±1.8§Å/¡É |
Common Mode : |
120 dB |
Normal Mode : |
60 dB Nominal @ 50/60Hz |
ÀÔ·Â ºÐÇØ´É |
0.001mV, 0.005¿È |
Ãâ·Â ºÐÇØ´É |
0.002mA |
ÀÔ·Â ÀÓÇÇ´ø½º |
10 ¸Þ°¡ ¿È |
ÁÖº¯ ¿Âµµ |
- 40 ~ +85 µµ ¾¾ |
º¸°ü ¿Âµµ |
- 50 ~ +85 µµ ¾¾ |
ÁÖº¯¿Âµµ ¿µÇâ |
RTD : 0.05% SPAN, T/C : 0.25% SPAN |
¾ÈÁ¤µµ |
0.1 % ¶Ç´Â 0.1 µµ ¾¾ |
·çÇÁ Àü¿ø |
13 ~ 45 VDC |
Ãâ·Â |
4 - 20 mA ¶Ç´Â * HART |
Ãâ·Â ¹üÀ§ |
3.5 - 28 mA |
°»½Å ÁÖ±â |
ÃÖ¼Ò ÃÊ´ç 2ȸ |
Common Mode |
100 dB @ 50/60Hz |
Normal Mode |
40 dB @ 50/60Hz |
Isolation : (In/Out) |
500 VAC |
RFI effect |
0.5% SPAN º¯È (470MHz, 5W, 1m °Å¸®»ç¿ë½Ã) |
¿É¼Ç ¾Ç¼¼»ç¸® |
¹æÆø ÇÏ¿ì¡ ¹× ¼³Ä¡ ¾Ç¼¼»ç¸®·ù |
HART versionÀº Factory ¹®ÀÇ ¿ä¸Á |
ÀÔ·Â |
T/C : J,K,E,T,R,S,B,N,C |
Ãâ·Â |
4 - 20mA |
Á¤È®µµ |
±
0.03%+input span+input accuracy |
¾ÈÁ¤µµ |
T/C ÀÔ·Â: 0.13% Max span (2 Yrs) |
Cycle |
ÃÊ´ç 8 ȸ Update |
Ripple |
¡Â10 mV peak-to-peak max. |
Over Voltage Protection |
ÀÔ·Â
: 4 V Max. |
Performance Load |
583 ¿È @ 24V typical |
ÁÖº¯¿Âµµ |
-40 ~ 85 µµ¾¾ |
RFI / EMI |
20V/m @ 20-1000 MHz |
CMMR |
100dB Min. @ 50/60 Hz |
Isolation |
500VAC/1000VDC Case-Input-Output |
Ç¥½Ã ȸé |
2x5 Character LCD Auto decimal points |
Certification |
CE
- EMC Directive 89/336/EEC |
¹«°Ô |
178 ±×·¥ |
mV ÀÔ·Â (Input) |
0.5mV ~ 100mV SPAN (Z in greater than10megohms) |
Ãâ·Â (Output) |
4-20 mA DC |
Output Loop Drive Capability |
|
Á¤È®µµ (Accuracy) |
±0.1% |
Independent Linearity |
±0.01% max.,±0.006% typical (14bit digital linearity) |
Repeatability |
±0.005% max., ±0.002% typ. |
Output Ripple |
10 mV (p-p) maximum |
Load Effect |
±0.005% zero to full load |
Isolation (IN-OUT-Case) |
1000 VDC or 600 VAC |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
Power supply |
8-42 VDC loop power |
Power Supply Effect |
±0.005% of span max. |
Reponse Time(°»½ÅÁÖ±â) |
110 milliseconds,(10% to 90% step input) |
Bandwidth |
(-3dB) 3.2 Hz |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
T/C ÀÔ·Â (Input) |
NIST Types J, K, T, E, N, B, R, S, G, C, D |
Ãâ·Â |
4-20 mA DC |
Output Loop Drive Capability |
|
Á¤È®µµ (Accuracy) |
±0.1% of mV input |
Independent Linearity |
±0.05% max.,±0.02% typical |
Repeatability |
±0.01% max., ±0.004% typ. |
Output Ripple |
10 mV (p-p) maximum |
Load Effect |
±0.005% zero to full load |
Isolation (IN-OUT-Case) |
1000 VDC or 600 VAC |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
Temperature Stability |
Zero TC: ±0.15µV/ºC |
Power supply |
12-42 VDC loop powered |
Power Supply Effect |
±0.005% of span overoperating range |
Common Mode Rejection |
100 db @ 60 Hz |
Reponse Time(°»½ÅÁÖ±â) |
67 milliseconds,(10% to 90% step input) |
Bandwidth |
5.24 Hz |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
T/C ÀÔ·Â (Input) |
NIST Types J, K, T, E, N, B, R, S, G, C, D |
Ãâ·Â |
4-20 mA DC; 0-20 mA DC;0-1 mA DC; |
Output Loop Drive Capability |
|
Á¤È®µµ (Accuracy) |
±0.1% of mV input |
Independent Linearity |
±0.05% max.,±0.02% typical |
Repeatability |
±0.01% max., ±0.004% typ. |
Output Ripple |
10 mV (p-p) maximum |
Load Effect |
±0.005% zero to full load |
Isolation (IN-OUT-Case) |
1000 VDC or 600 VAC |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
Temperature Stability |
Zero TC: ±0.15µV/ºC |
Power supply |
15-42 VDC at 33 mA max. |
Power Supply Effect |
±0.005% of span overoperating range |
Common Mode Rejection |
100 db @ 60 Hz |
Reponse Time(°»½ÅÁÖ±â) |
67 milliseconds,(10% to 90% step input) |
Bandwidth |
5.24 Hz, up to 130 Hz optional |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
RTD ÀÔ·Â (Input) |
2, 3 wire types, |
Ãâ·Â |
4-20 mA DC |
Output Loop Drive Capability |
|
Á¤È®µµ (Accuracy) |
±0.1% |
Independent Linearity |
±0.025% max.,±0.01% typical |
Conformance to RTD Curves |
0.15% max. |
Repeatability |
±0.005% max., ±0.002% typ. |
Output Ripple |
10 mV (p-p) maximum |
Load Effect |
±0.005% zero to full load |
Isolation (IN-OUT-Case) |
1000 VDC or 600 VAC |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
Temperature Stability |
Zero TC: |
Power supply |
8-42 VDC standard |
Power Supply Effect |
±0.005% of span max. |
Reponse Time(°»½ÅÁÖ±â) |
110 milliseconds,(10% to 90% step input) |
Bandwidth |
(-3dB) 3.2 Hz |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
RTD ÀÔ·Â (Input) |
2, 3, or 4 wire types, |
Ãâ·Â |
4-20 mA DC; 0-20 mA DC;0-1 mA DC; |
Output Loop Drive Capability |
|
Á¤È®µµ (Accuracy) |
±0.1% |
Independent Linearity |
±0.025% max.,±0.01% typical |
Conformance to RTD Curves |
0.15% max. |
Repeatability |
±0.005% max., ±0.002% typ. |
Output Ripple |
10 mV (p-p) maximum |
Load Effect |
±0.005% zero to full load |
Isolation (IN-OUT-Case) |
1000 VDC or 600 VAC |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
Temperature Stability |
Zero TC: |
Power supply |
15-42 VDC at 28mA typ. 33 mA max. |
Power Supply Effect |
±0.005% of span max. |
Reponse Time(°»½ÅÁÖ±â) |
110 milliseconds,(10% to 90% step input) |
Bandwidth |
(-3dB) 3.2 Hz |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
ÀÔ·Â |
T/C : J,K,E,T,R,S,B,N,C |
Ãâ·Â |
4 - 20mA |
Á¤È®µµ |
±
0.03%+input span+input accuracy |
¾ÈÁ¤µµ |
T/C ÀÔ·Â: 0.13% Max span (1 Yr) |
Cycle |
ÃÊ´ç 8 ȸ Update |
¼±Çüµµ |
0.1% SPAN |
Ripple |
¡Â10 mV peak-to-peak max. |
Over VoltageProtection |
ÀÔ·Â : 4 V Max. Ãâ·Â : 48 V Max. |
Burnout |
Up : 24mA Down : 3.3mA |
Output CurrentLimiting |
Input Over range : 21.4mA Broken Wire : 23.6mA |
TC input impedance |
40M Ohm |
RTD Excitation |
250§Ë, ±10% |
Performance Load |
500 ¿È @ 24V typical |
ÁÖº¯¿Âµµ |
-40 ~ 85 µµ¾¾ |
RFI / EMI |
20V/m @ 20-1000 MHz (SAMA 33.1) |
CMMR |
100dB Min. @ 50/60 Hz |
Isolation |
1500VAC/1000VDC Case-Input-Output |
Certification |
CE
- EMC Directive 89/336/EEC |
¹«°Ô |
HPP : 65±×·¥, DIN : 188 ±×·¥ |
ÀÔ·Â |
T/C : J,K,E,T,R,S,B,N,C,D,L,U |
Ãâ·Â |
4 - 20mA, HART |
Á¤È®µµ |
± 01% output accuracy Cold Junction : ±0.8µµ¾¾ |
¾ÈÁ¤µµ |
T/C ÀÔ·Â: 0.05µµ¾¾ (1 Yr) |
¼±Çüµµ |
0.1% SPAN |
Ripple |
¡Â0.06V peak-to-peak max. |
Max. Input Protection |
ÀÔ·Â : 35 V Max. |
Burnout |
Up : 20mA ~ 23mA Down : 3.6mA ~ 4mA |
Output CurrentLimiting |
IUser programmable 20mA ~ 23mA |
TC input impedance |
40 micro Ohm |
RTD Excitation |
200§Ë, ±10% |
Damping |
User Selectable 0 ~ 15 sec |
ÁÖº¯¿Âµµ |
-40 ~ 85 µµ¾¾ |
RFI / EMI |
30V/m @ 20-1000 MHz (SAMA 33.1) |
CMMR |
110dB Min. @ 50/60 Hz |
Isolation |
500VAC Input-Output |
Certification |
CE
- EMC Directive 89/336/EEC |
¹«°Ô |
HPP : 51±×·¥, |
ÀÔ·Â |
HART |
Ãâ·Â |
AO : 4 - 20mA, 0-20mA
¶Ç´Â MODBUS |
Á¤È®µµ |
Field
HART °è±â ¿ÀÂ÷¿¡ µû¸§ |
Isolation |
500Vrms
Channel-to-Channel |
Ç¥½Ã ȸé |
2Line
LCD, 5 Alphanumeric display |
ÁÖº¯¿Âµµ |
-25~70µµ¾¾ |
Å©±â |
65 x 100 x 138mm |
¹«°Ô |
567 ±×·¥ |
ÀÔ·Â (Input) |
AC Current: Any 0-1 to 0-5 amps AC |
Ãâ·Â(Output) |
4 ~ 20mA DC |
Zero Adjustment |
±5% nominal of span |
Course Span Adjustment |
100% of a major range(voltage only) |
Fine Span Adjustment |
±5% nominal of majorrange (±1 Amp for current input) |
Input Frequency Range |
25-1,000 Hz |
Input Overload Capability |
200% continuous |
Á¤È®µµ (Accuracy) |
±0.25% |
Independent Linearity |
±0.15% maximum,±0.06% typical |
Repeatability |
±0.005% max., ±0.002% typ |
Bandwidth |
(-3 db): 1 Hz |
Power Supply Effect |
±0.005% of span, max. |
Load Effect |
±0.005% zero to full loadOutput Ripple: |
Isolation (Input-output-case) |
1000 VDC or 600 VAC |
Output Ripple |
10 mV P/P maximum |
ÁÖº¯¿Âµµ |
-31 ~ +85 degC |
¿Âµµ ¿µÇâ |
Zero TC: ±0.01% of span max/°C Span TC:+0.02% of span max/°C |
Reponse Time(°»½ÅÁÖ±â) |
350 milliseconds,(10% to 90% step response) |
Housing |
PA 6.6 (Polyamid Non- Reinforced) |
Dimension (HWD) |
79 x 25 x 86 mm |
¹«°Ô |
115 ±×·¥ |
Mounting |
Standard DIN rail |
ÀÔ·Â |
4
- 20mA ( 260¿È ) |
Ãâ·Â |
3-15
Psi, 3 - 27 Psi, 15 - 3 Psi |
°ø±Þ ¾Ð·Â |
20
Psi, 35 Psi ( 3-27PsiÃâ·Â½Ã) |
½ºÅÜ ÀÀ´ä¼º |
0.3ÃÊ (Ãâ·Â¼³Á¤Ä¡ 90% µµ´Þ½Ã°£ ) |
°ø±â ¼Ò¸ð·® |
0.1 SCFM |
°ø±â ¿ë·® |
ÃÖ´ë 1.4 SCFM |
Çã¿ë ÃÖ´ë ÀÔ·Â |
ÀÔ·Â ¼³Á¤Ä¡ÀÇ 150% |
RFI / EMI È¿°ú |
¼³Á¤Ä¡ÀÇ 0.1%º¯µ¿ : 10V/m (20~1000MHz) |
ÁÖº¯¿Âµµ ¹üÀ§ |
-40 ~ 60µµ¾¾ ( ±0.1% À̳»/µµ¾¾)) |
Á¶Á¤ Çã¿ëÄ¡ |
Zero±3% of SPAN ¹× 100% SPAN |
¿¬°áºÎ |
1/4" NPTF (ÀÔ·Â´Ü ¹× °ø±â¾Ð °ø±Þ´Ü) |
¹«°Ô |
993 ±×·¥ |
Ãâ ·Â |
4
- 20mA ( 600¿È ) |
ÀÔ ·Â |
0-15,
3-15
, 3-27i, 0-30, 6-30 Psi |
°ø±Þ ¾Ð·Â |
20
Psi, 35 Psi ( 3-27PsiÃâ·Â½Ã) |
Calibration Capa |
±0.2% SPAN |
Repeatarbility |
±0.1 of input SPAN |
ºÐÇØ´É |
±0.1 of input SPAN |
RFI / EMI È¿°ú |
¼³Á¤Ä¡ÀÇ 0.2%Spanº¯µ¿ : 30V/m (20~1000MHz) |
ÁÖº¯¿Âµµ ¹üÀ§ |
-1 ~54µµ¾¾ ( ±0.1% À̳»/µµ¾¾)) |
Á¶Á¤ Çã¿ëÄ¡ |
Zero±10% of SPAN ¹× 100% SPAN |
¿¬°áºÎ |
1/4" NPTF |
¹«°Ô |
623~808 ±×·¥ |
ÀÔ·Â |
2ä³Î : 0-5V, 1-5V, 0-10V, 4
- 20 mA dip sw ¼±Åà |
Ãâ·Â |
2ä³Î : 2 x 4-20mA |
Á¤È®µµ |
± 0.1% SPAN |
Isolation |
1000Vrms , input - input & channel - channel |
CMMR |
95dB @ 60Hz |
Input Over range |
Àü·ù : 100mA |
ÁÖº¯¿Âµµ |
-40 ~ 70 µµ¾¾ |
Adjustment |
SPAN
: ±10% |
¹«°Ô |
230-241 ±×·¥ |
Line Voltage |
Universal Power |